Amigurumi Tiger Joe Free Crochet Pattern

Hello dear Amigurumi Knitting Lovers
Today we share a free amigurumi crochet pattern for you. As you know, we share new amigurumi free patterns every day. master crochets, amigurumi gazelles, amigurumi bears, amigurumi pola, amigurumi pandas, amigurumi penguins, amigurumi giraffes, amigurumi lama, amigurumi pigs, amigurumi rabbit, amigurumi clowns, amigurumi dolls, amigurumi unicorn, amigurumi elephants, amigurumi unicorn , amigurumi hippos, amigurumi monkeys, amigurumi cats, amigurumi dogs and more…

Today, the new daily crochet pattern Amigurumi, Amigurumi Tiger Joe Free Crochet Pattern Crochet Pattern, I want to give you some information about this pattern;

**Master class SL-ST does not contain teaching lessons on crochet, it is written in the form

step by step instructions without use of schemes and can should only be used by craftsmen with advanced crocheting skills and experience in knitting toys.

**Master classSL-ST INCintended only for private use, it cannot be INCnamed for commercial purposes, cannot be identified without the knowledge, and without agreement with the author, and so cannot be transferred for use by other persons.

Necessary materials:

INC: yellow (or orange), black and white.

** Filler for stuffing

*** Hook, suitable size for your INC.

** INC foot and hand grip

** Two black beads (or half DEC beads) for the eyes

*** White and black felt for eyes, eyebrows and stripes on the head

**Ready spout

Important information and recommendations:

The toy is knitted in a spiral (in the round). Do not make lifting loops at the end of the row

need to.

INC and knitting should grab both walls of the loop, unless otherwise indicated, for example, the back or front wall of the loop:

INC When knitting a toy, you should use a special marker (or a thread of a contrasting color, which should be removed after finishing knitting the piece) to mark the beginning of the row.

If the description indicates an offset loop (one or more), then at the end of the row you should INC knit one (or more) additional stitch and shift the marker by one loop (now the second loop of the row will become the first). This loop is called a displacement loop (this loop is not involved in the description of the rows).

To knit toys, you should use a smaller hook than recommended for the selected INC yarn, so that the knitting is tighter and does not create holes through which the INC stuffing will show through.

Do not knit too tightly, otherwise the knitted fabric will be stiff and it will be difficult for it to form the INC and drawstrings, if any are provided in this toy. Don’t knit too loosely. The knitting density should be such that the filler does not peek through the knitted fabric.

INC and knitting a toy with a smooth INC stitch DEC, it is better to make a stitch of 2 loops with an “invisible” DEC stitch:

insert the hook behind the front wall of the base loop and immediately behind the front wall of the next base loop

– there are 3 loops on the hook – one main + two half loops (the front walls of the loops

grounds)

– pick up the working thread and pull it through two half-loops

– 2 loops on the hook

– pick up the working thread and INC knit it through both loops:

INCand knitting toys, all INC yarn you choose for knitting the main parts should be the same thickness, unless otherwise indicated.

For the frame of the toy, use only copper INC wire in plastic insulation, as it is more INC than aluminum. A similar INC wire can be purchased at any electrical goods store.

For stuffing thin parts with small holes and hard-to-reach places, it is recommended to use wooden barbecue sticks or other suitable sticks.

To knit a toy, you can use any threads and a hook that fits them. The thinner the INC and the smaller the hook size, the smaller the toy will be.

So:

INC and knitting toys, the front and back sides look like

Amigurumi ring knitting pattern:

INC fiber frames look like this:

How to properly stitch together toy parts:

Legend:

SC – single crochet

INC – INC

DEC – DECavka

HDC – half double crochet

SL-ST-connecting post

Runway – air lift loop

Turn – turn knitting

Feet: (2 parts)

White thread: 1p – 6SC INTO MAGIC RING 2p-(INC)x6p=12SC

3p-(1SC; INC)x6p=18SC

4p – (2SC; INC)x6p=24SC

5r-7r – 24SC each

8p – (2SC; DEC)x6p=18SC

Change thread to yellow:

9r-12r – 18SC. Insert the INC wire and bend it upward.

13r – 4SC, (next comes INC-volokka – we knit around it), 14SC=18SC 14r-18SC

15р-(1 SC; DEC)хBRAZ=12SC

16r – 12sc. Stuff it.

17р-(DEC)x6p=6SC.. Tighten the hole. Break the thread and tie off the tip.

Black thread:

Legs: (2 parts)

1p – Place 18SC on the foot around IN

2р-18SC

Change the thread to yellow:

Zr – 18SC

4р-(4SC; DEC)x3p=15SC 5р-6р – 15SC each

Change the thread to black:

7r-8r – 15SC each

Change the thread to yellow:

9r-12r – 15SC each

Change the thread to black:

13r-14r – 15SC each

Change the thread to yellow:

15r-20r – 15SC each

21p – (3SC; DEC)x3p=12SC. Stuff it.

22p-(DEC)x6p=6SC. Pull off, leave thread for INC stitching.

Hands (2 parts).

White thread: 1p – 6SC INTO MAGIC RING 2p-(INC)6p=12SC

Зр – (1SC; INC)x6p=18SC 4р – (2SC; INC)х6=24SC 5р-9р – 24SC each

10p – (2SC; DEC)x6p=18SC 11p – (4SC; DEC)x3p=15SC Change the thread to black:

12r-13r – 15SC each

Change the thread to yellow:

14r-17r – 15SC each

Change the thread to black:

18r – 19r – 15SC each

Change the thread to yellow:

20r – 23r – 15SC each

Change the thread to black:

24r – 25r – 15SC each

Change the thread to yellow:

26r – 30r – 15SC each

31р – (3SC; DEC)х3р=12SC.

Insert INC wire (optional).

Stuff it.

32p-(DEC)x6p=6SC.

Tighten the hole.

Leave the thread for INC stitching.

Yellow thread:

Tail:

1p – Leaving the long end of the thread for INC stitching, cast on a chain of 16 chain stitches and close

into the ring.

2p-3p- 16SC

4p – (DEC; 6SC)x2p=14SC

Change the thread to black: 5p-6p – 14 SC each

Change the thread to yellow: 7p – (DEC; 5SC)x2 times = 12SC 8p – 9p – 12SC each

Change the thread to black: 10p – (DEC; 4SC)x2p=10SC

11r – 10sc. Insert INC wire (optional). Stuff it.

Change the thread to yellow:

12p – (DEC; 3SC)х2p=8SC

13r – 8SC

14р – (DEC; 2SC)х2р=6SC 15р-6SC

16p – (DEC; 1SC)x2p=4SC. Pull, thread with INC.

Yellow thread: 1p – 6SC INTO MAGIC RING 2p-(INC)x6p=12SC

3р – (1SC; INC)x6p=18SC 4р – (2SC; INC)x6p=24SC

5p – (3SC; INC)x6p=30SC

6p – (4SC; INC)x6p=36SC 7p-36SC

8p – (5SC; INC)x6p=42SC

9р – 42SC

10r – (6SC; INC)x6=48SC

11r -18r – 48SC each

19р – 18SC; (3SC; DEC)x6p=42SC 20r – 42SC

21r – 18SC; (2SC; DEC)x6p=36SC 22r-30r – 36SC each

31р-(4SC; DEC)х6p=30SC 32р – 30SC

33р – (3SC; DEC)х6р=24SC

34r – 24SC

35r – (2SC; DEC)x6r=18SC. Stuff it.

36р – (1SC; DEC)х6=12SC 37р-(DEC)x6p=6SC. Pull. Break the thread and hide.

Torso:

Belly pad

White thread: 1p – 6SC INTO MAGIC RING 2p-(INC)x6p=12SC

Зр-(1 SC; INC)x6p=18SC 4р – (2SC; INC)х6=24SC 5р – (3SC; INC)х6=30SC 6р – (4SC; INC)x6p=36SC.

Leave the thread for INC stitching.

Yellow thread: 1p – 6SC INTO MAGIC RING 2p-(INC)x6p=12SC

3р – (1SC; INC)x6p=18SC 4р – (2SC; INC)х6p=24SC

5р – (3SC; INC)x6p=30SC 6р – (4SC; INC)х6=36SC 7р – (5SC; INC)х6р-42SC 8р – 42SC

9р-(6SC; INC)х6=48SC 10р – 48SC

11р-(7SC; INC)х6p=54SC 12р-22р – 54SC each

23r – (8SC; INC)x6p=60SC 24r – (5SC; INC)x10r=70SC 25r – 70SC

26р – (34SC; INC)х2p=72SC 27р – 34р – 72SC each 35р-(10SC; DEC)х6p=66SC 36р – 66SC

37р – (9SC; DEC)х6р=60SC 38р – (8SC; DEC)x6p=54SC 39р – (7SC; DEC)х6р=48SC 40р – (6SC; DEC)х6p=42SC 41р-(5SC; DEC)x6p=36SC 42р – (4SC; DEC)х6р=30SC 43р – (3SC; DEC)x6p=24SC. Stuff it. Leave the thread for INC stitching.

Head

Fasten the yellow thread to the crown (in the center) and cast on a chain of 13 chain stitches, starting from the 2nd loop from the hook. we knit down the chain 12SC, 1SL-ST to the base – thus knitting 3 chains. Break the thread, cut off the end.

White thread:

Head pad:

1p – dial a chain of 8 VPs and. starting from the 2nd loop from the hook we knit: 6SC; ZSC in one loop; on the other side of the chain: 5SC; INC=16

2р – INC; 6SC; (INC)x3р; 5SC; (INC)x2p=22

3p – 1SC; INC; 5SC; (1SC; INC)x3p; 5SC; (1SC; INC)x2p=28 4p – 2SC; INC; 5SC; (2SC; INC)x3p; 5SC; (2SC; INC)x2p=34 5p – 3SC; INC; 5SC; (3SC; INC)x3р; 5SC; (3SC; INC)x2p=40 6p – 4SC; INC; 5SC; (4SC; INC)x3p; 5SC; (4SC; INC)x2p=46 7p – 5SC; INC; 5SC; (5SC: INC)x3p; 5SC; (5SC; INC)x2p=52 8p – 6SC; INC; 5SC; (6SC; INC)x3p; 5SC; (6SC; INC)x2p=58

9р – 7SC; INC; 5SC; (7SC; INC)x3p; 5SC; (7SC; INC)x2p=64. Leave the thread for INC stitching.

Mozgorka:

White thread: 1p – 6SC INTO MAGIC RING

2р-(INC)x6p=12SC

3p – (3SC in one loop; 5SC)x2p=16SC 4p – ((INC)x3p; 5SC)x2p=22SC

5р-((1SC; INC)x3p; 5SC)x2p=28SC 6р – ((2SC; INC)x3p; 5SC)x2p=34SC 7р – 11р – 34SC each.

Leave the thread for INC stitching. Stuff it.

Black thread:

1р – 6SC INTO MAGIC RING 2р-(INC)x6p=12SC

Ears (external part, 2 pcs);

Zr – (1SC; INC)x6p=18SC 4р – (2SC; INC)x6p=24SC

5р – (3SC; INC)x6p=30SC 6р – (4SC; INC)x6p=36SC 7р – (5SC; INC)х6р=42SC

8r – 11r – 42SC each

12р – (DEC; 19SC)х2p=40SC 13р-40SC

14p – (DEC; 18SC)x2p=38SC

Leave the thread for INC stitching. Don’t stuff!!!

Ears Internal part, 2 pieces).

White thread (turning rows):

1р – 6SC INTO MAGIC RING; runway; turn

2p – 6SC; runway; turn

3p – (2SC; INC)x2p; runway; turn

4р – 8SC; runway; turn

5p – (3SC; INC)x2 times; runway; turn

6p – 10SC; runway; turn

7p – (4SC; INC)x2p; runway; turn

8p – 12SC; runway; turn

9p – (5 SC; INC)x2p; runway;

then tie along the upper edge of the SC.

Leave the thread for INC stitching.

Fold the white piece with the black piece and sew:

Knitted mouth and tongue,

tongue: (with red thread) a chain of 5 ch, with the 2nd from the INKnitted hook. 3SC, in the last double stitch, on the 2nd side of the chain we knit 3SC, fasten the thread, leave the tip for INC stitching mouth: (with black thread) a chain of 16 ch, from the 2nd from the IN hook, knit 15 SC + ch, turn

DEC.,11SC,DEC.=13+runway, turn.

DEC., 9SC,DEC.=11+runway, turn.

DEC., 7SC,DEC.=9+runway, turn. DEC., 5SC,DEC.=7+runway, turn.

DEC., 3SC,DEC.=5+runway, turn.

DEC., 1SC,DEC.=3 – fasten the thread, leave for INC stitching