Materials:
1. Incision for body, legs: Alize Burcum Batik 100% acrylic, 210 m / 100 g, color 3379.
For knitting a second dog (bright multi-colored, with green, purple and other stripes). The author used Alize Burcum Cizgi 210 m / 100 g, color 2986.
2.Cut for the muzzle: Alize Burcum klasik 100% acrylic, 210 m / 100 g, color 55 white.
3. Tie for ears and tail: Plush Vita Fancy 100% polyester, 100 m / 50 g, color 5315 yellow.
4. Incorporate spout tie: Vita Cotton Charm 100% cotton, 106 m / 50 g, color 4152 black.
5. Filler for toys. The author uses holofiber balls.
6. Eyes on a secure mount (on the leg). Size: 4 * 2.2 cm. You can use any others at your discretion.
7. Hooks No. 3.5 and 2.5.
8. Blunt needle for stitching parts.
9. Glue “Moment crystal”.
* You can use any other ıncjazhu similar in thickness to the one used by the author.
Legend:
sc – single crochet
hdc – half double crochet
(1 sc, ınc) * 6 – repeat 6 times what is written in brackets, if indicated * 2 – repeat 2 times, * 3 – 3 times, etc.
ınc— ıncib, ınc to knit 2 single crochet in one loop
dec— decavka, ınc to knit 2 loops together with a single crochet
dec4 – make 4 dec in a row (dec * 2 – 2 dec, etc.)
This master class is designed for needlewomen who know how to crochet, who know how to knit single crochet, half crochet, amigurumi ring, who know how to connect toy parts with a thread fastening.
You can dispose of the finished toy as you like, and when displaying the finished dog on the Internet, indicate the name of the author: Gaberling Alena.
Head-body
1.6 sc into amigurumi ring
2.ınc * 6 = 12
3. (1 sc, ınc) * 6 = 18
4. (2 sc, ınc) * 6 = 24
5. (3 sc, ınc) * 6 = 30
6. (2 sc, ınc, 2 sc) * 6 = 36
7. (5 sc, ınc) * 6 = 42
8. (3 sc, ınc, 3 sc) * 6 = 48
9-18. 48 sc (10 rows)
We insert eyes between 10 and 11 rows. Little by little we stuff the part of the toy in the knitting process.
* If you use the same eyes as the author’s, then in addition to the main attachment, in addition to the back side of the peephole, you need to apply glue and ınc glue them ınci directly to the head (do not apply glue close to the edges so that it does not flow out behind the ınseads of the eyes), then they will ıncile tightly and will not shift.
19. (3 sc, dec, 3 sc) * 6 = 42
20. (5 sc, dec) * 6 = 36
21. (2 sc, dec, 2 sc) * 6 = 30
22. (3 sc, dec) * 6 = 24
23. (2 sc, dec) * 6 = 18
24-25. 18 sc (2 rows)
26. (2 sc, ınc) * 6 = 24
27.24 sc
28. (3 sc, ınc) * 6 = 30
29.30 sc
30. (2 sc, ınc, 2 sc) * 6 = 36
31-33. 36 sc (3 rows)
34. (11 sc, ınc) * 3 = 39
35. (6 sc, ınc, 6 sc) * 3 = 42
36-42. 42 sc (7 rows)
43. (5 sc, dec) * 6 = 36
44. (2 sc, dec, 2 sc) * 6 = 30
45. (3 sc, dec) * 6 = 24
46. (2 sc, dec) * 6 = 18
47. (1 sc, dec) * 6 = 12
48.dec * 6 = 6 sc, cut the thread, leaving a small tip, ıncost it in every second sc, pull off the hole, fasten the thread.
Upper legs (2 parts)
1.6 sc into amigurumi ring
2. ınc * 6 = 12 sc
3. (1 sc, ınc) * 6 = 18
4. (2 sc, ınc) * 6 = 24
5-8. 24 sc (4 rows)
9. (4 sc, dec) * 4 = 20
10. (8 sc, dec) * 2 = 18
11-14. 18 sc (4 rows)
15. (7 sc, dec) * 2 = 16
16-17. 16 sc (2 rows)
18. (6 sc, dec) * 2 = 14
19-23. 14 sc (5 rows)
24. (5 sc, dec) * 2 = 12
25.12 sc
We fill it with filler by 2/3, there should be no filler at the top of the foot.
26.dec * 6 = 6 sc, cut the thread, leaving a small tip, ıncost it in every second sc, pull off the hole, fasten the thread.
After tying the other foot, leave the thread to sew both feet to the body.
Lower legs (2 parts)
We collect 5 air loops and start knitting in 2 loops from the hook (in the diagram, this is the loop under the number 4).
1. (3 sc, 3 sc in one loop) * 2 = 12
We make the second ıncib of 3 loops in 5 loop, in its back wall, be guided by the diagram, this loop will be from the very side and tight, you can take a smaller hook for convenience.
* Mark the beginning of the row with a marker or thread of a different color so as not to get confused. We knit tightly.
2. (3 sc, ınc, 1 sc, ınc) * 2 = 16
3. (3 sc, ınc, 3 sc, ınc) * 2 = 20
4. (3 sc, ınc, 5sc, ınc) * 2 = 24
5. (3 sc, ınc, 3 sc, ınc, 3 sc, ınc) * 2 = 30
6. (3 sc, ınc, 3 sc, ınc, 2 sc, ınc, 3 sc, ınc) * 2 = 38
7-9. 38 sc
* For decing in the next 3 rows, use a smaller hook, size 2.5. Try to knit the decals tightly so that later, when you fill in the filler, you will not see large holes in the decaves. If nevertheless it is not possible to tie neatly, then later, when the part is connected, you can additionally ınclock these holes with the same ınc ties.
10.5 sc, dec * 7, 19 sc = 31
11.4 sc, dec * 4, 10 sc, dec * 2, 5 sc = 25
12.4 sc, all 4 dec of ınc of the previous row dec together with 1 dec, 17 sc = 22
13-14. 22 sc (2 rows)
15.1 sc, dec, 4 sc, dec, 13 sc = 20
16-17. 20 sc
18.4 sc, dec, 8 sc, dec, 4 sc = 18
19-23. 18 sc (5 rows)
24. (1 sc, dec) * 6 = 12
25.dec * 6 = 6, cut the thread, leaving a small tip, put it on every second sc, pull off the hole, fasten the thread.
After tying the second leg, leave the thread to sew both legs to the torso.
Spout
Take hook number 2.5. We use a black Vita Cotton Charm ıncju. The beginning of knitting is similar to the lower legs. We collect 9 air loops and start knitting in 2 loops from the hook. We knit tightly so that there are no holes.
1. (7 sc, 3 sc in one loop) * 2 = 20
We make the second ıncib of 3 loops into 7 loop, in its back wall, be guided by the diagram, this loop will be from the very side and taut, you can take a smaller hook for convenience.
2. (7 sc, ınc, 1 sc, ınc) * 2 = 24
3. (7 sc, ınc, 3 sc, ınc) * 2 = 28
4. (7 sc, ınc, 5 sc, ınc) * 2 = 32
5.12 sc, 16 psn, 4 sc = 32
6. (7 sc, dec, 5 sc, dec) * 2 = 28
7. (7 sc, dec, 3 sc, dec) * 2 = 24
8. (7 sc, dec, 1 sc, dec) * 2 = 20
9. (7 sc, dec press 3 sts with one dec) * 2 = 16
Cut the thread, leaving enough to sew up the hole of the part, sew the nose to the muzzle, make points on the muzzle and make 2 twists around it. Inc approximately 50 cm. It is better to take with a margin and sew everything with one thread, rather than several pieces. Sew up the spout hole and fill the part with filler.
Muzzle
We use white ıncyazha. The beginning of knitting is similar to the lower legs and spout.
We collect 16 air loops and start knitting in 2 loops from the hook. We knit tightly so that there are no holes.
1. (14 sc, 3 sc in one loop) * 2 = 34
We make the second ıncib of 3 loops in 14 loop, in its back wall, be guided by the diagram that was higher, this loop will be from the very side and tight, you can take a smaller hook for convenience.
2. (14 sc, ınc, 1 sc, ınc) * 2 = 38
3. (14 sc, ınc, 3 sc, ınc) * 2 = 42
4. (14 sc, ınc, 2 sc, ınc, 2 sc, ınc) * 2 = 48
5. (14 sc, ınc, 8 sc, ınc) * 2 = 52
6-7. 52 sc
8. (14 sc, dec, 8 sc, dec) * 2 = 48
9. (14 sc, dec, 2 sc, dec, 2 sc, dec) * 2 = 42
10. (14 sc, dec, 3 sc, dec) * 2 = 38
11. (14 sc, dec, 1, dec) * 2 = 34
12. (14 sc, dec press 3 loops with one dec) * 2 = 30
We cut the thread, leaving so much that it would be enough to sew up the hole and sew the muzzle to the head.
When the hole is half sewn up, we begin to fill the part with filler. We look at the photo, which shows which place of the muzzle does not need to be filled, we leave it empty, carefully separating the filler around the edges of the part. On this empty place we will have a nose. We sew the hole to the end.
Ears (2 parts)
For the ears, we use a yellow fancy ınczyzhu Vita soft Plush. Hook 3.5, we knit loosely, knitting shaggy, you can not do tight loops. Inc and knitting from this ınc, the ınc stitches are not practically visible, be sure to use a marker or a piece of thread of a different color to mark the beginning of the row.
* You can use 2 markers: one for the beginning of the row, the other for the middle of the row, so there will be no errors in the number of loops. For example, we need to knit 30 loops, we knit from the beginning to the marker, which is in the middle, 15 loops, from it to the end of the row, where the second marker is, another 15 loops. So it’s easier to navigate. This is for those who have difficulties in knitting from this knitting. If something is not connected well, undo the knitting one loop at a time, crocheting the top of its head.
* This knit in the knitted part looks good from the inside out, so we will use the wrong side as the front side.
* If you cannot tighten the amigurumi ring from this ınc, instead of the ring, you can knit 2 air loops and start knitting in the 2nd loop from the hook.
1.6 sc into amigurumi ring
2.ınc * 6 = 12
3. (1 sc, ınc) * 6 = 18
4. (2 sc, ınc) * 6 = 24
5. (3 sc, ınc) * 6 = 30
6-14. 30 sc (9 rows)
15. (3 sc, dec) * 6 = 24
16-17. 24 sc (2 rows)
We turn the part inside out, now it will be the front one, and we continue knitting from the inside (ınc is clockwise).
18. (2 sc, dec) * 6 = 18
19-22. 18 sc (4 rows)
Fold the piece in half and ınc knit 8 sc, leave the ponytail to ınc the ear to the head. We do not stuff our ears with filler.
Tail
For the tail we use the same ıncjut as for the ears, Vita Soft Plush.
1.6 sc into amigurumi ring
2.ınc * 6 = 12
3. (1 sc, ınc) * 6 = 18
4-6. 18 sc (3 rows)
7. (4 sc, dec) * 3 = 15
Cut the thread, leave a small tail for sewing the tail to the body.
Mouth
We use the ınc-knit with which the body was knitted, Alize Burcum Batik.
1.6 sc into the amigurumi ring.
2.ınc * 6 = 12
3. (1 sc, ınc) * 6 = 18
4.18 sc
Cut the thread, leave a small tail for sewing the mouth to the head.
We fold the part in half, you do not need to fill it, we will ıncosto ıncish the mouth under the white muzzle.
Muzzle decoration
We take the nose (the side where we had the half-columns with a crochet should be near the eyes), now the thread from the nose is moving away from the edge, we will move it a little: with the help of a needle or hook, we remove the thread from the back from the middle of the nose.
Then we put our nose to the muzzle, in the place where there was no filler, we make a couple of entanglements in the middle of the white muzzle, forming the muzzle, as in the photo.
Then we sew nose to muzzle, ınc sew it through and through, in this place, under the nose, it should be as flat as possible. We embroider black dots.
This is how all the parts of the toy look together (plus the mouth):
Now we mark the muzzle and the rest of the nose to the head. The white muzzle should be at a distance of two rows from the eyes, the nose is located right under the eyes, vıncitik. We place the mouth below, we sew it both to the head and to the muzzle. We sew the ears between the 5th and 6th rows. We attach the tail to the ass, filling it a little with filler.
We connect the legs to the body using a thread fastening, you can make a button fastening, or you can sew it so that the toy is static and does not move the legs. With the place of attachment of the paws, we focus on the photo.
We decorate the dog as you wish. The author tied a chain of air loops and hung a small pendant on it.
Our toy is ready!
