AMİFURUMİ FREE PATTERNS, amigurumi, amigurumi doll, amigurumi free animals, amigurumi free crochet, amigurumi free patterns

Amigurumi Cute Christmas Baby Free Crochet Pattern

Hello dear Amigurumi KNITTING LOVERS
Today, we share one free amigurumi crochet pattern for you. As you know, we share new amigurumi free patterns every day. Main crochets, amigurumi gazelles, amigurumi bears, amigurumi pola, amigurumi pandas, amigurumi penguins, amigurumi giraffes, amigurumi lama, amigurumi pigs, amigurumi bunny, amigurumi clowns, amigurumi dolls, amigurumi unigurumi lambs, amigurumi dolls, amigurumi bees, amigurumi dinosaurs, amigurumi elephants, amigurumi hippos, amigurumi monkeys, amigurumi cats, amigurumi dogs and more…

Today’s daily new crochet pattern Amigurumi Cute Christmas Baby Free Crochet Pattern without amigurumi
I want to give you some information about this pattern;

Materials

• Sock weight yarn in black, white, light

peach, yellow, red, green

• Lace yarn or embroidery floss in brown

• 2.5mm crochet hook

• Fiberfill

• Stitch markers

• Yarn needle

• 10mm safety eyes

• White felt

• A pair of scissors

• 3.5cm pom pom maker

• 6mm buttons in red, green, yellow, light

green

• Sewing needle

• White sewing thread

Terminology (US)

magic ring

ch (chain)

st (stitch)

sc (single crochet)

hdc (half double crochet)

dc (double crochet)

inc (increase)

dec (decrease)

BLO (back loop only)

FLO (front loop only)

4-dc bobble st

Loop stitch

sl st (slip stitch)

YO (yarn over)

4-dc bobble st

BOOT (make 2)

Round 1: With black yarn, ch 6. Starting from second

ch from the hook, sc 4, 3 sc in the last ch. Continuing

on the opposite side of the foundation chain, sc 3, 3 sc

in the last ch. (13)

Round 2: sc 4, inc in the next 3 st, sc 3, inc in the last

3 st. (19)

Round 3: sc 6, inc in the next 3 st, sc 7, inc in the last

3 st. (25)

Round 4: Working in BLO, hdc around. (25)

Round 5-6: sc around. (25)

Round 7: sc 4, dec X 6, sc 9. (19)

Round 8: sc 3, dec X 4, sc 8. (15)

Round 9-10: sc around. (15)

Round 11: Mark the back loop of the next st. sl st

in the front loop of the same st and ch 1. FLO hdc

around. sl st in the next st to join. (15)

Fasten off. Weave in yarn end.

LEG (make 2)

Fold the boot cuff outwards to reveal the unworked

back loops of Round 11. Join white yarn.

Round 1-7: sc around. (15)

Fasten off, leaving a long tail (this will be used later to

sew the gap between the doll’s legs). Count back from

the end of the round and mark the fourth st. Stuff.

Make the second leg and stuff but do not fasten off. sl

st in the next 2 st. Mark the last worked st as the end

of the round.

BODY

We will continue working on the second leg and join

the legs in the next round.

Round 1: ch 2, sc in the marked st of the first leg, sc in

the next 14 st. ch 3, sc in all 15 st of the second leg. (35)

Round 2: sc in each of the next 2 ch, sc 15, inc in each

of the next 3 ch, sc 15. (38)

Round 3: sc 17, (sc 2, inc) X 2, sc 15. (40)

Round 4: (sc 4, inc) X 8. (48)

Using a yarn needle and the yarn tail you had left at

the last round of the first leg, sew the gap between

the doll’s legs.

Round 5-7: sc around. (48)

Round 8: (sc 6, dec) X 6. (42)

Round 9: sc around. (42)

Round 10: (sc 5, dec) X 6. (36)

Round 11: sc around. (36)

Round 12: (sc 4, dec) X 6. (30)

Round 13: sc around. (30)

Round 14: (sc 3, dec) X 6. (24)

Stuff.

Round 15-20: sc around. (24)

Round 21: (sc 2, dec) X 6. (18)

Stuff.

Round 22: (sc 1, dec) X 6. (12)

Round 23-30: sc around. (12)

It is very important to stuff the neck as firmly as possible at this point so it can support the weight of the

head.

Round 31: dec X 6. (6)

Fasten off, leaving a long tail. Using your yarn needle,

weave the yarn tail through the front loop of each

remaining stitch and pull it tight, closing off the neck.

Weave in the yarn end.

ARM (make 2)

Round 1: With light peach, 6 sc in a magic ring. (6)

Round 2: Inc in all 6 st. (12)

Round 3: (sc 1, inc) X 6. (18)

Round 4-5: sc around. (18)

Round 6: 4-dc bobble st1

, dec, (sc 1, dec) X 5. (12)

If you are unfamiliar with this stitch, this pattern

includes a section on how to make a 4-dc bobble stitch.

Round 7: sc around. (12)

Round 8-12: With white, sc around. (12)

Round 13: (sc 2, dec) X 3. (9)

Round 14-21: sc around. (9)

Round 22: dec X 4, sc 1. (5)

Fasten off, leaving a long tail. Using your yarn needle,

weave the yarn tail through the front loop of each

remaining stitch and pull it tight, closing off the gap.

Weave in yarn end.

HEAD

Before we start working on the head, we will cut out

two round pieces from white felt. These pieces should

be slightly bigger than the safety eyes you are using.

Make a hole slightly off center and insert eye through

the hole. Keep these aside.

Round 1: With light peach yarn, 8 sc in a magic ring. (8)

Round 2: inc in all 8 st. (16)

Round 3: (sc 1, inc) X 8. (24)

Round 4: (sc 2, inc) X 8. (32)

Round 5: (sc 3, inc) X 8. (40)

Round 6: (sc 4, inc) X 8. (48)

Round 7: (sc 5, inc) X 8. (56)

Round 8-17: sc around. (56)

Round 18: (sc 5, dec) X 8. (48)

Round 19: (sc 4, dec) X 8. (40)

Round 20: (sc 3, dec) X 8. (32)

Round 21: (sc 2, dec) X 8. (24)

Insert eyes between Round 15 and 16, 9 stitches apart

Round 22: dec X 12. (12)

Fasten off, leaving a long tail. Stuff head, leaving

some space in the center for the neck that will be

inserted later.

EYELINER

Thread a yarn needle with brown lace yarn or

embroidery floss, insert needle from the neck opening

and embroider the embellishment around the eyes as

seen in the picture.

NOSE

Sew 3 straight lines, 3 stitches long between Round 16

and 17 of the head.

HAIR

To make the doll’s hair, we will work a 6 inch loop

stitch in each stitch every alternate row.

Round 1: With yellow, 8 sc in a magic ring. (8)

Round 2: Making a 6 inch loop st in each stitch, inc in

all 8 st. (16)

Round 3: (sc 1, inc) X 8. (24)

Round 4: Making a 6 inch loop st in each stitch, (sc 2,

inc) X 4. (32)

Round 5: (sc 3, inc) X 8. (40)

Round 6: Making a 6 inch loop st in each stitch,(sc 4,

inc) X 8, ch 1, turn. (48)

Round 7: (sc 5, inc) X 8. (56)

Round 8: Making a 6 inch loop st in each stitch, sc

around. (56)

Fasten off, leaving a long tail to sew. Position wig on

the head using pearl headed pins and sew in place.

Cut open the loops and trim hair.

JOIN HEAD TO BODY

To make the head of your amigurumi movable, thread

yellow yarn and insert the needle from the center of the

magic ring on the wig and out from the neck opening

(see figure 1). Count down 8 rounds from the top of

the neck. Now insert your needle through the neck at

this point, back through the neck opening on the head, bringing it out again from the magic ring on the wig.

Slide the head down the two strands of yarn until it sits

perfectly on the neck. Knot the yarn ends together a few

times to secure. Clip off excess yarn.

CAP

To make ribbed edge:

Row 1: With red, ch 5. Starting from second ch from

the hook, sc across, ch 1, turn. (4)

Row 2: sc across, ch 1, turn. (4)

Row 3: With green, BLO sc across, ch 1, turn. (4)

Row 4: sc across, ch 1, turn. (4)

Row 5: With red, BLO sc across, ch 1, turn. (4)

Row 6: sc across, ch 1, turn. (4)

Repeat rows 3-6 until there are a total of 30 stripes

(each stripe = 2 rows).

To join the ribbed band, bring both ends of the band

together and join with a sl st. We will now continue

working in rounds.

Round 1: With red, ch 1. Pick up 1 st for each row and

sc 60 st, sl st to join. (60)

Round 2: ch 3, dc around, sl st to join. (60)

Round 3: ch 3, (dc 8, dec) X 6, sl st to join. (54)

Round 4: ch 3, dc around, sl st to join. (54)

Round 5: ch 3, (dc 7, dec) X 6, sl st to join. (48)

Round 6: ch 3, dc around, sl st to join. (48)

Round 7: ch 3, (dc 6, dec) X 6, sl st to join. (42)

Round 8: ch 3, dc around, sl st to join. (42)

Round 9: ch 3, (dc 5, dec) X 6, sl st to join. (36)

Round 10-12: ch 3, dc around, sl st to join. (36)

Round 13: ch 3, (dc 4, dec) X 6, sl st to join. (30)

Round 14-16: ch 3, dc around, sl st to join. (30)

Round 17: ch 3, (dc 3, dec) X 6, sl st to join. (24)

Round 18-20: ch 3, dc around, sl st to join. (24)

Round 21: ch 3, (dc 2, dec) X 6, sl st to join. (18)

Round 22: ch 3, dc around, sl st to join. (18)

Round 23: ch 3, (dc 1, dec) X 6, sl st to join. (12)

Round 24: ch 3, dc around, sl st to join. (12)

Round 25: ch 3, dec X 6. (6)

Fasten off, leaving a long tail. Using your yarn needle, weave the yarn tail through the front loop of each

remaining stitch and pull it tight, closing off the gap.

Weave in yarn end.

Pom pom: Make a pom pom using a 3.5 cm pom

pom maker and green yarn, and sew it to the top of

the hat. Slip hat carefully over the head.

Evenly space red, green, yellow and light green 6mm

buttons on the front of the body and sew them in

place using a white sewing thread and sewing needle.

Tie a red ribbon around the amigurumi’s neck.

Leave a Reply

Your email address will not be published. Required fields are marked *

error: Content is protected !!