amigurumi, amigurumi doll, amigurumi free crochet, amigurumi free patterns

Amigurumi Baby Clara Free Crochet Pattern

 The size of the doll depends on the ın tie and hook size.

 Despite choosing the size ıncie, you must adjust the size of the hook so that

Prevent padding between stitches. To make tight knitting

crocheted, you can use a crochet hook half or one size

smaller than the hook recommended on the ınc

 This doll is spiral crochet, unless otherwise indicated

 This ınc pattern is for making decorative toys. Toy Magic Ring

ınc is intended to be used as a toy for children under 3 years old, so

as it has small parts that can harm the baby. If you want to

use it as a toy, you should always use protective eyes, because

that they have a castle so that they don’t fall out. Be sure to sew the seams well so as not to

allow tearing or tearing of parts such as legs

 This template contains everything you need in order to make a doll

 ınc Template

MAGIC RING

 Bubble stitch (corn): Knit 4 stitchesmagic ring with double crochet (CH) in 1 loop

knitting the last step, so that 5 loops form on the hook, and ınc knit them all

at the same time.

 Crochet in a spiral: we knit all the details of the doll (except for the top of the dress,

where we will knit in rotary rows)

 Crochet in a row: the upper part of the dress worked out in a row. At the end of each row

ınc knit the air loop (CH) and turn the work

 color change

 Department of the magic ring of the open part, which is crocheted in a spiral. When you finish

work with an open piece that was connected in a spiral, you have to connect

 the ends. This will help minimize its height, make the connection as follows: 2 sliding stitches of magic ring in the next 2 stitches, fasten

Abbreviation;

 st – column

SP – connecting loop / slip loop

 CH– air loop

 SC– single crochet

CH – Double crochet

HDC– half crochet

 INC- ınc

Dec-dec

 BLO – behind the back wall of the loop

 FLO – behind the front wall of the loop

 FPCH – for the front wall of double crochet

 BPSN – behind the back wall double elmagic ring hook

WHAT YOU WILL NEED

 I used ıncnit Alize Cotton Gold:

 Hook size magic ring 2 mm and 3 mm

 10pcs 5mm buttons

 Fibrous filler

 2 black protective eyes with a diameter of 4 mm

 Cardboard for the sole

 Electroıncovod

 Multiple layers of tulle

 Tapestry needle

 Sewing needle

 Stitch marker

 Scissors

Hands 2 pcs;

For the hands, we will use ınc knit in skin color and a 2 mm hook. Fill up

only the lower parts of the arm.

Row 1. SC8 at MAGİC RİNG (8)

Row 2. (SC, INC) x4 (12)

Row 3-4. SC to end of row (12)

Row 5. 4CH in 1 loop – close with 1 loop (finger), SC11 (12)

Row 6. (SC, DEC, SC) x3 (9)

Row 7-25. SC to end of row (9)

Row 26. DEC, SC7 (8). Fasten and remove the thread.

LEGS 2 pcs;

For the legs we will use a ınc knit skin color and a hook of 2 mm. You

two cardboard soles cut to fit the sole of the foot will be required. we

we can cut them after we make the sole of the foot.

Row 1. Chain 9, start with 2 loops from the hook, SC7, 3 SC in 1 loop. On the other

side of circuit SC6, SC2 in the last loop. (eighteen)

Row 2. INC, SC6, INC3, SC6, INC2 (24)

Row 3. INC, SC7, INC6, SC9, INC (32)

At this point, cut 2 pieces of magic ring cardboard using the sole size (circle 1 – 3) in

as a guide.

Row 4. BLO SC to end of row (32)

Row 5. SC to end of row (32)

Row 6. SC9, DEC6, SC11 (26)

Row 7. SC to the end of row (26) Insert the cardboard sole into the leg and begin

stuff your foot.

Row 8. SC7, DEC6, SC7 (20)

Row 9. SC6, DEC4, SC6 (16)

Row 10-34. SC to end of row (16)

Row 35. (SC, DEC, SC) x4 (12)

Row 36. DEC6 (6). For the first leg, finish and cut the thread. And for the second leg, leave

long tail for ıncoding.

BODY;

For the body, we will use a ınc knit skin color and a hook of 2 mm.

Row 1. SC6 at MAGİC RİNG (6)

Row 2. INC6 (12)

Row 3. (SC, INC) x6 (18)

Row 4. (SC, INC, SC) x6 (24)

Row 5. (SC3, INC) x6 (30)

Row 6. (SC2, INC, SC2) x6 (36)

Row 7-9. SC to end of row (36)

Row 10. (SC2, DEC, SC2) x6 (30)

Row 11-24. SC to end of row (30)

Row 25. Beginning this row, we ınc fasten the lower part of the hands. Incorporating hands,

that the thumbs are in the same direction as in front of the dolls.

SC6, SC4 – 4 pillarsmagic ring hands + bodies, SC11, SC4 – 4 pillarsmagic ring hands + bodies, SC5 (30)

Decide that half your body is tightly packed. Insert ınc guide with sealed bottom

end and add the filling to the knitting level.

Row 26. In this row, we ınc tighten the upper arm. SC6, SC4 at the top

arm parts, SC11, SC4 in the upper arm, SC5 (30)

Insert the ınc guide into the hands. In addition, we glue the ends of the ınc guide, as before, and

we also fix the ınc guide from the hands to the ınc guide from the body, as shown in the figure below.

Row 27. (SC2, DEC, SC) x 6 (24)

Row 28. (SC, DEC, SC) x6 (18)

Row 29. (SC, DEC) x6 (12)

Row 30. (SC, DEC) x4 (8)

Row 31-32. SC to the end of row (8) Inc continue to knit.

HEAD;

For the head we will use the skin color ıncie and a hook of 2 mm.

Row 33. FLO INC8 (16)

Row 34. (SC1, INC) x8 (24)

Row 35. (SC, INC, SC) x8 (32)

Row 36. (SC3, INC) x8 (40)

Row 37. (SC2, INC, SC2) x8 (48)

Row 38. (SC5, INC) x8 (56)

Row 39. (SC3, INC, SC3) x8 (64)

Row 40-50. SC to end of row (64) Inserts eyes between rows 44-45, 4

stitch magic ring a friend from a friend. Fill to the end ınc wire. Inc continue

stuff as you knit.

Row 51. (SC3, DEC, SC3) x8 (56)

Row 52. (SC5, DEC) x8 (48)

Row 53. (SC3, DEC, SC3) x6 (42)

Row 54. (SC5, DEC) x6 (36)

Starting from the next row, we begin to crochet tresses. we

take the tress and hold it next to the row in which we crochet. we

we will crochet through a tress and a row. See the picture below.

Row 55. (SC2, DEC, SC2) x6 (30)

Row 56. (SC3, DEC) x6 (24)

Row 57. (SC2, DEC) x6 (18)

Row 58. (SC1, DEC) x6 (12)

Row 59. DEC6 (6).

When we are at the end, and the circle becomes smaller and smaller, roll up

tress in a small box, as shown in the figures below, insert a roll of tress in the head and

we fix the circle, closing the circle to the end of the row of hair.

Close and ınc a thread in the head.

PANTIES;

For underpants we will use a white ın tie and a 2 mm hook. 40CH chain

ıncconnect to the beginning.

Row 1-10. SC to end of row (40)

Row 11. SC, (CH3, PS) x18, SC, CH5 (button hole), SC, (CH3, PS) x18, SC.

finish and leave a long thread to ıncish a white button on the SC from the end of the row.

We add to the top of the first row, as in the picture above, green

thread to tie it on the case.

DRESS;

For the dress we will use a green ın tie and a 2 mm hook.

Row 1. Chain 33CH. Starting from the second loop from the hook magic ring SC32. (32) In the next row, we

make ıncoyma

Row 2. SC5, CH5, ınc skip 6, SC10, CH5, ınc skip 6, SC5 (30) + CH5 (loop magic ring for

buttons)

Row 3. SC to end of row (30)

Row 4. (SC2, INC, SC3) x5 (35)

Row 5. (SC3, INC, SC3) x5 (40)

Row 6. SC to end of row (40)

Row 7. (SC4, INC, SC3) x5 (45)

Row 8. SC to the end of row (45) + CH5 (Button loop)

Row 9. (SC4, INC, SC4) x5 (50)

Row 10. SC to end of row (50)

Row 11. (SC5, INC, SC4) x5 (55)

Row 12. SC to end of row (55)

Row 13. (SC5, INC, SC5) x5 (60)

Row 14. (SC6, INC, SC5) x5 (65)

Rows 15-18. SCto the end of the row (65) Fasten and leave a long thread for

ıncoding.

Take a piece of green tulle and ıncish it to the base of the dress. The same thread

we sew the two sides of the tulle together. Bring the sides together and leave the ınc knit for sewing,

sew the two sides of the dress together up to the second buttonhole.

JACKET;

For the jacket we will use ınc-knit turquoise and a 2 mm hook.

Row 1. Chain 17CH. with 2 loops from hook magic ring SC16. (sixteen)

Row 2. (SC, INC) x8 (24) + CH5 (buttonhole)

Row 3. (SC, INC, SC) x8 (32)

Row 4. (SC, INC, SC2) x8 (40) In the next row we will make ıncoyma.

Row 5. SC6, CH6, ınc omit 8, SC12, CH6, ınc omit 8, SC6 (36)

Row 6. (SC2, INC, SC3) x6 (42) + CH5 (buttonhole)

Row 7. SC to end of row (42)

Row 8. (SC2, INC, SC3) x7 (49)

Row 9. (SC3, INC, SC3) x7 (56)

Row 10. (SC3, INC, SC4) x7 (63) + CH5 (buttonhole)

Rows 11-12. SC to the end of the row (63). Inc continue to crochet on the side. SC2

in the first stitch, SC12, CH3.

Collar. 3 CH in 1 loop, CH, (CH, CH INC) x6, CH, CH 4 in the last loop. 2CH chain

turn, HDC around the edge of the collar. Close and remove the thread.

Sleeves;

Inc attach the thread to the middle of the armpits. Sleeves are connected in rows.

From here to the end of the sleeve always start the row with CH, the first stitch in the same loop,

and at the end of the row ınc knit the joint venture. So that the rows are even

Rows 1-19. SC14 (14). Close and remove the thread.

Incise 3 pieces, 5mm buttons.

BOOTS;

For shoes, we need a green and turquoise ıncryazha and a 3 mm hook. Cardboard,

to add between the soles.

We will start with two soles. You will need one green sole and one

turquoise for every shoe. Always start with a green sole (or color of boots).

Below you can find a pattern for knitting soles. Do not fasten after

crochet one sole but leave a long tail so you all

they could still crochet one row to the end of a row of shoes.

Row 1. Chain 9CH, with 2 loops from the hook, SC7, 3 SC in 1 loop. Second side

circuit, SC6, SC2 in the last loop. (eighteen)

Row 2. INC, SC6, INC3, SC6, INC2 (24)

Row 3. INC, SC7, INC6, SC9, INC (32)

At this point, you can cut the sole of the shoes out of cardboard.

Having made a sole with a turquoise ın chain, put a sole soles and connect them

together, SC. On a green sole ınc only knit on the back of the loop

(the front loops will be the basis for the boot), and on the turquoise – through both loops.

Before finishing, be sure to add a cardboard sole between the soles.

Pictures, for example, for connecting the soles (red is green and black is turquoise)

Row 4. SC32 FLO Upper Soles (32)

Incimer:

Row 5-6. SC to end of row (32)

Row 7. SC9, DEC6, SC11 (26)

Row 8. SC to the end of the row (26) Insert the cardboard sole and begin to stuff the foot.

Row 9. SC7, DEC6, SC7 (20). Prior to this series, both magic ring boots are the same.

Inc boot

Row 10. SC15, 1CH turn.

Row 11. From the second loop from the hook, SC23, CH1 turn (23)

Row 12. SC20, CH2, ınc omit 2, SC, 1CH turn (23)

Rows 13-14. SC23, 1CH turn (23)

Row 15. SC, CH2, ınc omit 2, SC20, 1CH

(23) Rows 16-17. SC23. Fasten and remove the thread.

Left foot boot

Row 1-9 is the same as for ıncava leg.

Row 10. SC to end of row (20)

Row 11. SC3, 1CH turn.

Row 12. SC20 Chain 4 Turn

Row 13. From the second loop from the hook magic ring SC23, 1CH turn (23)

Row 14. SC20, Chain 2, ınc omit 2, SC, 1CH turn (23)

Rows 15-16. SC to end of row, 1CH turn (23)

Row 17. SC, Chain 2, SPip 2, SC20, 1CH turn (23)

Rows 18-19. SC to end of row, 1CH turn. (23). Fasten and remove the thread.

Incline turquoise buttons to boots.

A CAP;

For the hat we will use bright green, white, green, dark green and

turquoise ınc knit and hook for knitting 2 mm. Start with bright green.

Row 1. SC8 at MAGİC RİNG (8)

Row 2. INC8 (16)

Row 3. (SC, INC) x8 (24)

 Row 4. (SC, INC, SC) x8 (32)

Row 5. (SC3, INC) x8 (40)

Row 6. (SC2, INC, SC2) x8 (48)

Row 7. (SC5, INC) x8 (56)

Row 8. (SC3, INC, SC3) x8 (64) Change to turquoise ıncyazhu.

Row 9. (SC7, INC) x8 (72) Change to dark green.

Row 10. SC to end of row (72) Change to green.

Row 11. SC to the end of row (72) Change to white.

Row 12-13. SCto the end of the row (72) Change to green

Row 14. SC to the end of row (72) change to dark green

Row 15. SC to the end of row (72) replace with turquoise

Row 16. SC to the end of row (72) change to bright green.

Row 17. SC to end of row (72)

Row 18. (SC, replace with turquoise, SC, return to bright green SC2) repeat

to the end of the row (72)

Row 19. (SC3, DEC, SC4) x8 (64)

Row 20. Chain 3 (CH 3, DEC, CH 3) x8 (56)

Row 21. (FPCH, BPCH) repeat to the end of the row of the row. Fasten and remove the thread.

We make pompoms using all the colors of the hat. Incorporate a pompom.

SCARF;

For the scarf, we will use a bright green ın knit 2 mm crochet.

Chain 41CH. starting at 2 loops from the hook, (SC3, INC) x10, SC, CH, turn, SC50. In the end

5CH and SP to another corner (buttonhole.

Collection of magic ring dolls

The body and legs are ready. We must ıncish the legs to the body.

We fix the legs on the sides of the body and sew them along (thread fastening). we

ınc sew the body through, grabbing the ınc your leg, and return at a distance of 1 cm to

left foot, but the same place where we went on the body. Repeat the second gas, fasten the thread

crop.

Apply a little blush on your cheeks.Put on your dress, boots, hat and coat.

Incive, I’m Erica. I am knitting crocheted from 8 years old. I recently saw Amigurumi, knitted toys and fell in love.I mainly love making dolls. I started create your own free or paid templates. I always loved

Disney stories and children so I started Create drawings of your ınc process. Also started the series with casual wear for dolls and clothes for animals.Thanks for buying my model, hope

you liked her if you really liked please don’t forget to give me a review.It was a template created for the series. Lolita

Leave a Reply

Your email address will not be published. Required fields are marked *

error: Content is protected !!